GM Key Impressioning

Originating an automotive key can be a simple task most of the time. There are many methods available for getting the right cuts to make a key such as getting the code stamped on one of the locks or ignition switch, or just by getting the code from an automotive locksmith database which cost money. Impressioning an automotive key is one of the older methods of originating a key and can be difficult at times for the average locksmith technician. However there will be times where it will be necessary using this method.

I got a call the other day to make a new key for the ignition of a 1988 Camaro. The customer said the vehicle was mostly riven during the summer time, but he hasn't driven it in a couple of years and misplaced the keys to it. Since I knew it wasn't a GM vehicle that incorporated a VATS system ignition, I knew it won't be hard making a new key for it. I took the customer info and started heading his way.

Once I got to the customer's home, I went over my automotive guide for the best way in getting the codes to make a key for this vehicle. It seemed that I had to take apart the ignition switch since the key to the ignition switch was different than the key to the door and trunk lock. When I went to my van to get the steering wheel puller (as it is needed in order to get the ignition switch out on these vehicles), I could not find it. At that point I figured my best choice would be to impression the cuts and make a key.

I then grabbed a GM key blank from my van and as I started to insert him in order to get the marks for the cuts, I noticed it did not want to get in all the way. After couple of minutes of trying, I decided to call a co-worker of mine who had more experience impressioning an automotive key than I. After getting him on the phone, he said that the 5th and 6th position wafers are much deeper which prevented me fully inserting the blank. He then suggested to gently file a little from the tip of the key which inturn will allow me to fully insert the blank and get the marks I needed to make the key. Surprisingly it worked, and I was able to originate a new key for the customer in no time.

Visit these links for more information on Seattle locksmith services. | Premier NorthWest Locksmith Seattle.